• SmartAX MT882a ADSL CPE User Guide HUAWEI TECHNOLOGIES CO., LTD. • SmartAX MT882a ADSL CPE V100R001 User Guide Issue Date 2008-12-24 Part Number 103130. • Copyright © Huawei Technologies Co., Ltd. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. • MT882a...15 4.2 Accessing the Network Through the PPP Dial-Up Software on the Computer....16 5 Configuring the MT882a.. 17 5.1 Changing the Administrator Password Used for Logging In to the Web Configuration Page...17 5.2 Changing the IP Address..18. • 6 FAQs...18 7 Appendix...22 7.1 Indicators...22 7.2 Interfaces and Buttons..22 7.3 Default Settings...23 7.4 Technical Specifications..23.

• 1 Safety Precautions Thank you for purchasing SmartAX MT882a ADSL CPE (hereinafter referred to as the MT882a). For safety purposes, carefully read through these safety precautions and observe them during operation. Basic Requirements Keep the device dry during storage, transportation, and operation of the device. • Operation Requirements Do not allow children to play with the device or accessories. Swallowing the accessories may be fatal. Use the accessories such as the power adaptor provided or authorized only by the manufacturer. Make sure that the device does not get wet.

Look at most relevant Driver modem smartax 882a websites out of 3.69 Thousand at KeyOptimize.com. Driver modem smartax 882a. Corel Draw X7. Driver Modem Huawei Smartax Mt 882A. SmartAX MT-882a by Huawei information and hardware knowledge base.

If water gets into the device, disconnect the power supply immediately and unplug all the cables connected to the device. • After the MT882a is used for a certain period of time, the cover will be heated, which will not affect the function of the MT882a. • 2 Connecting the Cables and Getting Started 2.1 Simple Connection If your telephone line is used for the broadband network access only and you do not need to use a telephone, take the following figure as a reference for connecting the cables. • 2.2 Connecting One Telephone If your telephone line is used for both the broadband network access and a telephone connection, take the following figure as a reference for connecting the cables. POWER RESET ADSL 1 Telephone jack on the wall 2 Splitter 3 Telephone 4 Computer.

• 8 Power adapter 2.4 Getting Started Press the power button on the top of the MT882a to power on the MT882a. Rogue Spear 2.05 Patch Pc on this page. After you power on the MT882a, the ADSL indicator blinks (for less than three minutes), indicating that the MT882a is being activated.

Later, the ADSL indicator. • MT882a, both PCs can access the Internet. If you hope to connect your PC through the USB port to the MT882a, you need to install the USB driver on the PC.

The USB driver of the MT882a supports the following. • The usb_driver_for_linux directory stores the source code file of the Linux OS driver. Step 5 Add the following two configuration command lines at the end of the rc.local file in the /etc/rc.d directory. Insmod /usr/local/lib/trendchip/trendchip.o &>/dev/null & ifconfig eth1 192.168.1.2 up &>/dev/null & After you add the two configuration command lines, the system automatically loads the USB driver during start. • YPE=Ethernet Step 9 Restart the PC. Step 10 Connect the MT882a through a USB cable to the PC, and then power on the MT882a.

3.2 Installing the USB Driver on the MAC OS To install the USB driver on the MAC OS, perform the following steps. • Step 3 Click Next. The Authenticate dialog box is displayed. Step 4 Enter the OS administrator account and the password, and then click OK. Step 5 Click Accept to start the installation procedure.

• Step 7 Select Restart now and click Finish to restart the PC. Step 8 Connect the MT882a through a USB cable to the PC, and then power on the MT882a. 3.3 Installing the USB Driver on the Windows To install the USB driver on the Windows OS, perform the following steps. • Step 3 In the Choose Setup Language dialog box, select a language such as English, and then click Next. Step 4 Click Next. • Step 5 Select Typical, and then click Next.

Step 6 Click Next to start the installation procedure. Wait for the installer to complete the installation. A dialog box is displayed, asking you to connect the terminal. • Step 7 Connect the MT882a through a USB cable to the PC, and then power on the MT882a.

Wait for the MT882a to start. The Hardware Installation dialog box is displayed.

Step 8 Click Continue Anyway to continue with the installation. • 4. Imazing Activation Keygen. 1 Accessing the Network Through the Embedded PPP Dial-Up Software of the MT882a If you select this method for accessing the network, the MT882a starts to set up dial-up connection automatically after the startup.